[. . . ] €¢ WARNING: never leave the stroller on a sloped surface with a child onboard, even with the brakes applied. €¢ WARNING: when not in use, the stroller must be kept away from the reach of children. • WARNING: This product must only be pushed by an adult. €¢ Ensure that the person using the stroller knows how to use it safely. [. . . ] 15, secure first of all the 2 plastic hooks (H) to the pins on the front of the structure. Next, insert the 2 strings on the basket, in the two plastic slots under the seat and secure them by means of the press buttons (I). Finally, secure the remaining 4 strings with the press buttons, to the rear tubes of the stroller (K). CANOPY Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water. MAINTENANCE Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant. Regularly check the condition of the wheels and, keep them clean of dust and sand. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. GENERAL INSTRUCTIONS WHEELS ASSEMBLY In some configurations, the wheels may come not assembled. Insert the rear wheel blocks as indicated in figure 1, until they lock in position. Then insert the front wheel block on the stroller until it locks in position (fig. WARNING: The child’s weight can make these operations more difficult. BACKREST ASSEMBLY COMPONENTS A) Backrest tube B) Connection of backrest tube C) Front release button D) Rear joint E) Rear release button 6. To assemble the backrest, insert both backrest tubes (A) in the corresponding coupling (B) as shown in fig. Once the two tubes are inserted in the coupling, rotate the rear joint (D) so as to align rib F with housing G (fig. 7A) and insert the pin present on the frame, inside the hole of the rear joint until you hear a click (fig. WARNING: before using the product in the stroller configuration, always check the correct assembly of the backrest. Thread the safety harness abdominal straps through the slots located on the side of the backrest cover (fig. Thread the crotch strap leg divider through the slot located on the backrest cover (fig. Press the two edges of the leg rest to adjust it to the desired position (fig. By pressing the button on the handle, it is possible to rotate the handgrip to the desired position, adapting it to the height and most comfortable position for the user (fig. WARNING: during use, the handgrip must not be used in lowered position (fig. [. . . ] Important note: the images and instructions contained in this handbook refer to one version of the stroller; some components and functions described herein may vary according to the version of the stroller you have purchased. FOLDING THE STROLLER WARNING: carry out this operation making sure that your child, or other children, are at a safe distance. Make sure that during these phases, the moving parts of the stroller do not come into contact with the child’s body. Pull both levers on the handles upward; keeping them pulled, release the rear U-joint, pushing it upward with your toe (fig. [. . . ]